Download Duralast Jump Starter Manual
Price $15.69Clore Automotive introduces the SOLAR ESA30 OBD II Memory Saver Connector, a memory saver connector that can be used in conjunction with a jump starter to preserve vehicle codes and electronic presets while a vehicle’s battery is disconnected. The ESA30 can be used on any jump starter with a 12 Volt power port. The ESA30 acts as an interface connector between a jump starter and a vehicle’s OBD II port. This prevents any electronic memory loss when disconnecting a vehicle’s battery. A proper connection is confirmed by the ESA30’s built-in LED light.
.900 Peak Amp Jump-Starter Model No.: PKC0AZ Owner’s Manual and Warranty Information Read these instructions completely before using this product. Retain this Owner’s Manual for future reference. © 2014 3/14.CONTENTS SAFETY PRECAUTIONS. 2 Jump-Starter Safety. 2 Battery Jump-Starting Safety.2 INTRODUCTION.4 FEATURES.4 OPERATION. 5 Checking Jump-Starter Battery Status.5 Low Charge Alert (LCA).5 Charging Jump-Starter Battery.5 Jump-Starting (Negative Ground Systems Only).5 DC Power Socket Operation.Do not smoke or use ammable items (matches, cigarette lighters, etc.) while working on a vehicle’s battery system. Never jump-start a frozen battery, as it could explode.
Perform all jump-starting procedures in a safe, dry, well-ventilated area. Do not expose battery to re or intense heat since it can explode. Before recycling or disposing of a battery, protect exposed terminals with heavy-duty electrical tape to prevent shorting (shorting can result in personal injury or re).Please keep this manual on le for future reference.
Peak Jump Starter 600 Blinking Fl
FEATURES Built-in 900 peak amps battery jump-starter with quick storing cables and clamps Built-in 12-volt DC power socket for powering DC appliances Built-in USB power outlet.OPERATION Checking Jump-Starter Battery Status Press and hold the battery status button, located on the front of the unit, to check the Jump-Starter battery charge level. The battery indicator display will indicate battery charge state as a percentage of the full battery capacity. Low Charge Alert (LCA) On the front of the unit there is a Low Charge Alert port.EXPLOSION HAZARD Jump-start cable clamp connections at the vehicle’s battery terminals must be positive to positive (red clamp to battery “+”) and negative (black clamp) to the grounding point such as the metal frame of the vehicle. A reverse polarity connection (positive to negative) may cause damage to the unit and/or create a sparking/explosion hazard.Worklight Operation Simply turn the worklight ON/OFF switch (on the front panel) to the ON position.
Download Duralast Jump Starter Manual 600 Amp
The worklight will operate. Turn o when not in use. TROUBLESHOOTING Problem Situation Action Vehicle does not Improper cable clamp Rotate the cable clamps back and forth to make a start connections good connection.Manufacturer warrants to the original consumer, or purchaser, that the PEAK® 900 Peak Amp Jump-Starter PKC0AZ will be free from defects in material and workmanship for one year from the date of sale to the original purchaser. Manufacturer hereby excludes and disclaims any and all other warranties, expressed or implied, beyond those warranties speci ed above.